(Solved): Question 6 (1 point) Increasing the compression ratio in an extruder will decrease the heat generat ...

Question 6 (1 point) Increasing the compression ratio in an extruder will decrease the heat generated True False Question 7 (1 point) Increasing the mass flow rate in an extruder will increase the heat generated True False Question 8 (1 point) Decreasing the orifice size in an extruder will increase the heat generated True False Question 9 (Mandatory) (3 points) A 2 in long nylon engine support has a CTE \( 2.0 \times 10^{\wedge}-4 \) in/in* F . When heated from room temperature at 65 degrees to operating temperature at 190 degrees, what is the strain in in/in? 0.05 0.5 0.0025 0.025 Question 10 (Mandatory) (3 points) 42 in long nylon engine support has a CTE \( 2.0 \times 10^{\wedge}-4 \mathrm{in} / \mathrm{in}^{*} \mathrm{~F} \). When heated from room temperature at 65 degrees to operating temperature at 190 degrees, what is the change in length in inches? 0.05 0.025 0.5 0.2525