A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. For point A, see Figure 4, which is located on the surface of the shaft: a) What are the coordinate voltages? b) Draw the stress distribution (above the cross section - yz-plane) for elastic state, partial plastic state and complete plastic state. c) What is the cross-sectional module for plastic condition.

Question

A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. For point A, see Figure 4, which is located on the surface of the shaft:

a) What are the coordinate voltages?
b) Draw the stress distribution (above the cross section - yz-plane) for elastic state, partial plastic state and complete plastic state.
c) What is the cross-sectional module for plastic condition.

Aluminum
Steel
A
2.0m
B
1.5m
1.5m
2.5m
1.5m
(? P

Aluminum Steel A 2.0m B 1.5m 1.5m 2.5m 1.5m (? P

Accepted Answer

Expert Answer to -  A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. F

Answer

Solution for -  A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. F

Answer

This an additional answer to -  A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. F

(Solved): A solid shaft with D = 100 mm is loaded with an axial force P = 200 kN and a torsional force kNm. F ...

View Expert Answer

Expert Answer

Buy This Answer $5

Place Order